It’s been quite a while since we have attempted a major home project. I have a bedroom set that I got when I was about 16. The headboard for the bed will hold a full or queen size bed. A couple of years ago we upgraded to a king mattress and box springs (when you have 2 golden retrievers sleeping with you, you don’t have much choice). We could not attach that to the headboard, so we just stood the headboard up between it and the wall, but you could tell it was too small, so it looked a little funny.

The headboard was curvy, with different carvings and panels in it, so whenever I sat up in bed to read or watch TV, my head was against some uneven part of wood. It drove me nuts. Pillows did not do the trick. I wanted a padded headboard. There are some out there, but none of them are in colors I would choose. So, we decided to make our own. This project was actually pretty inexpensive (in contrast to buying a pre-made headboard) and was accomplished in one day.

First we measured how big we wanted it to be. Then we bought fabric, batting, a piece of wood and a big piece of foam. We cut the wood an inch smaller all around than the foam, so that the edges would be soft. We used a spray adhesive to attached the foam to the wood. We covered it in batting and then covered it in the fabric. We used an air compressor stapler gun which makes it quick work.

We worked slowly and carefully because the pattern is linear. The hardest part was the corners. It took some trying, but we came up with a technique that had some very small folds/creases at the corners so it wasn’t too lumpy.

Mounting it on the wall was very easy because Mr. MarthaandMe bought these fantastic self-leveling mirror hangers. You attach one piece to the wall and the other to the back of the headboard. They catch each other and hold the headboard up (each one will hold up to 75 lbs and we used 2). It was easier than I ever imagined.

Total cost: under $300. The fabric and batting were both 50% off at JoAnn Fabric. Wood was from Lowe’s for about $8. The foam was from a special foam store. We would have had to use 2 pieces if we bought it at JoAnn and were worried the seam would show. Mr. MarthaAndMe used to repair office furniture and used to buy foam for chairs from this store. We got a professional discount since they remembered him (it still was not cheap – $78).

It took us most of the day but we kept getting interrupted for other things, so this could really be done in just a few hours.

I am THRILLED with how this turned out. I will be going to bed early from now so I can spend some time reading, leaning against it!

It’s been quite a while since we have attempted a major home project. I have a bedroom set that I got when I was about 16. The headboard for the bed will hold a full or queen size bed. A couple of years ago we upgraded to a king mattress and box springs (when you … Read more →